Safety/Relief/PSV Valve Test Bench

Safety valve test and calibration bench-Manual control/computer control model 1. Product application and functional characteristics Safety valve test bench is used for various safety valve setting pressure adjustment, the whole set pressure detection, discharge pressure detection, back seat...

Send Inquiry
Product Details

Safety Valve Test Bench-Manual control/computer control model


safety valve test bench video,click to watch


Here below is the video link for manual+digital control safety valve test bench:

Manual+digital control safety valve test bench video


Herebelow is the video link for portable safety valve test bench:

Portable safety valve test bench video



image001(001)

1 .Introduction

The safety valve test bench is a new type of pressure test device developed by our company for reference to GB/T 12242-2005 (pressure release device and performance test specification), which is used to adjust and test the setting pressure of the safety valve.


2, Function and features

Safety valve test benchis used for various safety valve setting pressure adjustment, the whole set pressure detection, discharge pressure detection, back seat pressure testing, assessment of its pressure safety performance etc.. ,

A. pressure range: 0-480 bar for option(gas pressure and water pressure)

B. test medium: air, nitrogen, water;

C. test valve diameter: DN15-DN400 for option

D. pressure control accuracy: less than 1%F.S;

E. pressure measurement accuracy: 0.4 pressure gauge (optional higher pressure level);

F. Clamping way: hydraulic cylinder clamping;

G. station interface type: screw and flange type

H. clamping force output range: 0-50 tons;

I. supply voltage: 50Hz -60Hz ,220V/380V for option

J:Size:1500×1200×900mm(machine) +1500×800×800mm(clamping device)


3.Control panel

20191231091541


4.Clamping seat

20191231091649


5.Instruction for software control part

image014(001)

Figure 1

The first step: start the computer and double click the boot program, as shown in Figure 1.


The second step: 1) after the program, enter the main interface of the program.

image016(001)

2)In the main interface, select the appropriate sensor, and pay attention to the selection of the sensor not to exceed the 2/3. of the measuring process ,as shown in Figure3

image018(001)


3) Display the dialog box for the test information, as shown below

image020(001)


With printer,could print the testing report directly.

image022(001)



 


 

 

 




Hot Tags: Safety Valve Test Bench,Relief Valve Test Bench,PSV test bench
Inquiry
内裤女教师无修版动漫