<p id="g949k"></p>

  1. <table id="g949k"></table>

    <output id="g949k"></output>
    <acronym id="g949k"><strong id="g949k"><xmp id="g949k"></xmp></strong></acronym>
    <pre id="g949k"></pre>

      Dongguan Suncenter Fluid Control Equipment Co., Ltd

      Expert of high pressure pumps and systems.

      Focusing on high pressure fluid field for over 15 years.

      Home > News > Content
      Automobile Air Compressor and Valve Test Bench
      - May 18, 2017 -

      Basic Info

      • Model NO.: QYZ-2A

      • Certification: ISO

      • Condition: New

      • Power: 380V 50Hz

      • Trademark: Haolida

      • Origin: Qingdao China

      • Testing Equipment Type: Car Fault Detector

      • Update Method: by Hard Disk

      • Standard: Standard

      • Motor Power: 5.5kw

      • Specification: ISO9001

      • HS Code: 9301200090

      Product Description

                        QYZ-2 Model Automobile air compressor  and valve test bench
      1.Technical Parameter
      Working power: AC380V 50HZ (Made to measure)
      Motor power: 5.5KW
      Variable frequency speed regulating range:
      no load 0-5000r/min
      load 0-2000r/min(continuously adjustable)
      Volume of main air tank: 20L*2 or 20L*3
      Volume of sub air tank: 2L*3
      Auxiliary tank of air pump: 15L
      Requirement of external air source: 0.85Mpa
      Microcomputer hour meter: 000.000--999.999S(adjustable)
      Rated pressure of oil pump: 0.3MPa
      2. Function Introduction (double-chamber or three-chamber test)
      Automobile air compressor and valve test bench is used mainly for testing performance of air compressor, master valve, air chamber, quick release valve and four-circuit valve in brake system of high, medium and low models automobiles at home and abroad and carrying out double-chamber or three-chamber test of master valve.
      It is with PLC computer system to operate by touching its screen, you can see the test process and results directly, and print test results if necessary.
      Test Items:
      air compressor: The time required by air compressor to reach specified pressure value when air compressor runs at rated RPM.
      Master valve: the required time of inflating air from main tank into air chamber through master valve (the time through air);
      Air chamber: after air is inflated from main tank into air chamber to reach set pressure value, hold the pressure.
      Quick release valve: after air is inflated from main tank into sub-tank through quick release valve to reach set pressure value, hold the pressure.
      Four-circuit valve: the same with test of quick release valve.

      MOQ: 1 set
      Panel: English
      Delivery time : 35days
      Payment term:
      T/T 50% in advance,50% before delivery
      Packing :
      Export Plywood case
      G.W: 850KGS
      N.G: 700KGS