<p id="g949k"></p>

  1. <table id="g949k"></table>

    <output id="g949k"></output>
    <acronym id="g949k"><strong id="g949k"><xmp id="g949k"></xmp></strong></acronym>
    <pre id="g949k"></pre>

      Dongguan Suncenter Fluid Control Equipment Co., Ltd

      Expert of high pressure pumps and systems.

      Focusing on high pressure fluid field for over 15 years.

      Home > News > Content
      Closed Cabinet Portable Ws-Js 100-2000 Bar High Pressure Air Hydrostatic Pressure Test System
      - May 12, 2017 -

      Product Detail

      Basic Info

      • Model NO.:WS-JS

      • Pressure Medium:Oil

      • Type:Desktop

      • Position of Pump Shaft:Horizontal

      • Certification:CE

      • Trademark:Usun

      • Specification:CE/ ISO9001

      • Origin:Made in Dong Guan / China

      • HS Code:8412310090

      Product Description

      High quality model : WS-JS  10-200Mpa  High pressure air hydraulic

      system ,hydraulic power  Unit ,  air hydrostatic testing machine

      ,pneumatic driven hydraulic power pack ,high pressure hydraulic test

      bench , Portable closed cabinet air hydraulic pressure test bench  

      • Hydraulic Power Packs include WS-JS Model are complete hydraulic units ready for connection which are provided for generating operating pressures up to 190MPa.It is suitable for powering a variety of medium,such as oil, water or corrosive liquids.

      • As the pressure will be generated by means of a pneumatically operated pump.The electric connection will not be necessary.

      • To operate this system, the air driven liquid pump have to be equipped with the air control unit combined filter and water seperator, pressure-regulating valve,pressure control gauge as well as manual relieve valve.In this operation,the pump will be mounted to the stainless steel tank in the closed cabinet in a compact and space saving manner.Pressure gauges, valves and pressure regulators will be fitted on panel.

      • The desired operating pressure can be attained by adjusting the driving air pressure.When the driving air pressure and the output pressure reach the balance,the pump stops filling pressure and the output pressure stays at the preset value.

      • This hydraulic unit can be used for all kinds of pressure testing and test tools for research and test institutes or for other functions requiring a determined pressure.  

      • The configuration of the systems include :  air pressure gauge , outlet pressure gauge ( On the first line of the Panel )

      • The hand ball ( For control the on/ff the system ) , air pressure regulator valve ( for control the air pressure  )

      • Outlet needle valve ( for control the output of High pressure ) ,Uploading needle valve ( For releasing the high pressure ) ,it is on second line  and also include 1 set JS240 air driven liquid pump , 16 Liters hydraulic tank  inside of the cabinet  and related pipelines

      Technical parameters   Driven piston diameter is : 125 mm

      TypeWS-JSAir drive pressure3-8barMax. outlet pressure(at air drive pressure of 8bar)10- 190MPAGeneration of pressureair drive liquid pump Model :JSPressure ratio17:1 or 25:1 or 39:1 or 60:1 or 240:1 Air consumption0.5-1.0 m3/minOperating mediumOil, water, non-corrosive liquidsDriving mediumCompressed airOil /Water tank capacity16L or 20 L or 40 LDimensions (W x D x H)700x500x900mm


      JS model ,Maximum filling flow rate is around :1.06Liter per Min ,when pressure increase ,the flow rate


      comes down ,Specification of the JS Pump as bellow for reference ,this is also for Liquid system





      The inlet port size is :ZG1/4'' or NPT 1/4'' and Outlet port size of this model is : M14X1.5


      ? Contact Now