Model NO.: HZ-010
Maxcapacity: Max Load:3000 Kn
Load Way: Hydraulic Load
Oil Cylinder Position: Under
Test Force Resolution: 0.01kn
Scope of Application: Brick, Stone, Cement, Concrete and Other Building
Motor Power: 0.75kw/0.75kw/1.1kw
Performance: High Quality, 3 Years Warranty
HS Code: 9024101000
Type: Universal Testing Machine
Accuracy Grade: 0.5
Loading Method: Hydraulic Load
Control: Manual Control
Power Source: AC380V
Usage: Compression Testing Machine
Max Load: 2000kn/3000kn Hydraulic Press Instrument
Hydraulic Pump Rated Pressure: 40mpa
Piston Stroke: 30mm/30mm/50mm
Test Force Measuring Range: 4%-100%Fs
The testing machine is mainly used for brick, stone, cement, concrete and other building materials, compressive strength test, also used to test the compressive performance of other materials.
Spatial adjustment method:
Through the hand wheel rotation, the adjustment of space to achieve compression.
China mainland factory/manufacturer
The oil tank is sucked through the filter screen and be inhaled pump oil, through the petroleum pipeline of oil pump transport to oil valve, When the hand wheel to send off the oil, due to the role of oil will push the piston, the oil from the return pipe to tank, when the hand wheel to open get the oil, then the working fluid into the fuel tank through the tubing, pressure tubing through and through oil return valve to tank.
This machine adopts hydraulic loading, electronic measuring force, with a load of figures, the loading rate shows, the maximum load to maintain, as well as overload protection and power data retention and other functions.
Safety protection device:
When the test force more than 3% of the maximum test force, the overload protection, oil pump motor shut down.
Whole set fixtures include: A set compression platen fixture
|Test force measuring range||4%-100%FS|
|Test Force showed the relative error||≤indicating value±1%||≤indicating value±1%||<indicating value±1%|
|silk pole adjustment method||Manual operation||power-driven||power-driven|
|Test Force Resolution||0.01kN||0.01kN||0.01kN|
|Hydraulic pump rated pressure||40MPa|
|Upper and lower bearing plate size||φ225mm×φ300mm||φ260mm×φ300mm||φ370mm×φ370mm|
|Maximum distance between the upper and lower plate||320mm||320mm||330mm|
|Motor Power||0.75 kW||0.75 kW||1.1 kW|
- 0-30t Hydraulic Pressure Strength T...
- Pipe Hydraulic Pressure Test Equipm...
- Yaw Series Microcomputer Controlled...
- Salable Electrical Hydrostatic Pres...
- Flipped Double Hold Pressure Valve ...
- Hydrostatic Pipe Tester-Plastic Pip...
- Closed Cabinet Portable Ws-Js 100-2...
- Low Cut Model: Ws-Ah 80-1000 Bar Ai...
- Pipeline Electric Fire Fighting Wat...
- Electro Hydraulic Building Material...
- Hydraulic Automatic Pressure Testin...
- Rotary Piston Vacuum Pump Systems w...
- Lube Oil Filtration System for Lube...
- Electro Hydraulic Pressure Testing ...
- Electro-Hydraulic Pressure Testing ...
- Pump Maintenance
- Centrifugal Pump Why Return?
- Causes Abnormal Vibration Of Centri...
- Pneumatic Pressure Cylinder Suddenl...
- Consumption Of Gas Booster Valve Pr...