<p id="g949k"></p>

  1. <table id="g949k"></table>

    <output id="g949k"></output>
    <acronym id="g949k"><strong id="g949k"><xmp id="g949k"></xmp></strong></acronym>
    <pre id="g949k"></pre>

      Dongguan Suncenter Fluid Control Equipment Co., Ltd

      Expert of high pressure pumps and systems.

      Focusing on high pressure fluid field for over 15 years.

      Home > News > Content
      Hydrostatic Test Pump
      - Aug 22, 2017 -

      Hydrostatic Test Pump Basic Info

      • Model NO.: HLT12

      • Automation: Non Automation

      • Production Scope: Parts Production Line

      • Size Range: 3, 2kg/5kg/6kg/11kg/12kg/12.5kg/50kg

      • Transport Package: Standard Seaworthy Package

      • Origin: Jiangsu China

      • Certification: ISO

      • Rhythm: Flow Production Line

      • Products: LPG Cylinder Tank End Dish Necking Machine

      • Trademark: Longterm

      • Specification: depends on machine

      • HS Code: 85152100

      Hydrostatic Test Pump Product Description


      LPG cylinder tank End dish necking machine



      Description of machine
      Technical data
      Motor power:4.5-11kw  Air pressure:0.6Mpa  Thickness of plate:1-10mm 
      Necking head diameter:150-1200mm Necking time:10-50s (adjustable)
      Weight of machine:1.5-3T

       

      No.DescriptionModel & SizeUnit
       Main Manufacturing Equipment 
      1Hydraulic presser for blanking sheet630Tset
      2Open mill and shearing machine set
      3Round sheet cutting/blanking mould13KGset
      4Round sheet cutting/blanking mould6KGset
      5Hydraulic Drawing machine200/300set
      6Drawing mould13KGset
      7Drawing mould6KGset
      8Trimmimg machineQK-5set
      9Cleaning/polishing machine set
      10Hole punching machine set
      11Valve Seat Welding Machine set
      12Shroud/handle welding machine set
      13Bottom base welding machine set
      18Assembly machine/assemble the two halves into oneZH-3set
      19Circumferential seam welding machineHJ-3set
      20Heat treatment/annealing furnace set
      21Hydrostatic/pressure Testing UnitSY-4set
      22Shot blasting machine set
      23Powder coating line set
      24Valve mounting machine set
      25Leakage testing machineCM-3set
      26Printing machineZS-3set
      27Burst Test Unit set
        Total 
       Auxilary Equipment 
      1Mechanical power press100Tset
      2Mechanical power press40Tset
      3Hydraulic press200Tset
      4Coding machine set
      5Shrould rolling machine set
      6Bottom base rolling machine set
      7Bottom base welding fixure set
      8Upper raduis rolling machine180Tset
      9Mechanical power press63Tset
      10Shrould mould set
      11Bottom base mould set
      12Printing mould pair


      1.De-coil and punching machine for small round sheet cutting from big sheet(material preparing for shell)
       

      2. Hydraulic press drawing the head(200-300T)

      Press the round sheet into a shell with dies

      3. Automatic trimming machine
      This machine is reliable, easy to operate.
      Technical data
      Motor power:5.5KW   Air pressure:0.6Mpa   Trimming time:20s   Weight of machine:1.5T

      4. End dish necking machine
      Technical data
      Motor power:4.5-11kw  Air pressure:0.6Mpa  Thickness of plate:1-10mm 
      Necking head diameter:150-1200mm Necking time:10-50s (adjustable)
      Weight of machine:1.5-3T

      5.Cleaning machine
      Technical data
      Motor power:1.5kw   Polishing motor power:1.5kw*2  Air pressure:0.6Mpa
      Polishing wheel feed range:0.2-20mm  Efficiency:180Pcs/hour  Weight of machine:1.2T


      6.Hole punching machine
      Punch the hole on head of the cylinder
      Technical data
      Motor power:5.5kw  Punching speed:180Pcs/hour  Weight of machine:1.5T


      7.Valve Seat Welding Machine
      To complete the welding of valve seat ring joints. Ensure uniform forming, good appearance, weld penetration and weld width meets the technological requirements, the clamping is convenient. Using submerged arc welding technology, girth welding at one time
      Technical data
      Rated voltage:220V Motor power:0.25kw Air pressure:0.6Mpa


      8.Bottom base welding machine
      Complete cylinder base girth automatic welding. To ensure concentricity, uniform forming, good appearance, weld penetration and weld width meet the technological requirements, the clamping is convenient. CO2 gas shield welding process, complete in one time welding.
      Technical data
      Current:AC380V+N    Motor power:0.55kw   Air cylinder pressure:0.5-0.7Mpa


      9.Protection enclosure welding machine
      Complete cylinder base girth automatic welding. To ensure concentricity, uniform forming, good appearance, weld penetration and weld width meet the technological requirements, the clamping is convenient. CO2 gas shield welding process, complete in one time welding.
      Technical data
      Rated voltage:AC380V  Motor power:0.55kw  Air cylinder pressure:0.5-0.7Mpa


      10.Assembling Machine
      To assemble both halves of the cylinder together and get ready for welding
      Technical data
      Cylinder diameter:250mm     Air cylinder pressure:0.5-0.7Mpa


      11.Circumferential Seam welding machine
      Technical data
      Voltage:AC380V+N  Motor power:0.55KW  Rotation speed:Max.10rpm/min (adjustable) 
      Motor power:0.55kw


      12. Gas car-bottom heat treating furnace machine
      This furnace is designed to anneal LPG cylinders by applying flame from gas burner on the cylinders. It composes, burner, flaming chamber, smoke collector, rails, chain roller, exhaling system.
      It feature includes, adjustable time, self-control thermometer, perfect heat treatment result and fire off pollution.
      Technical data
      Producing efficiency:75pcs/hr  Feeding type:Chain drive/cylinder feeding
      Cleaning size:?320*700mm------?420*1250mm
      Dimension:(L*W*H):12500*1390*1560mm   removable transport




      13.Hydrostatic Testing Machine
      The machine is special for steel cylinder of liquefied gas cylinders,applicable to manufacturers and testing station for wuthstand voltage test on cylinder.Irrigation,pressurization,pressure,maintaining centralized control and automatic pouring completed by using water pump,equipped with a water tank,water can be recycled.
      Technical data:
      Pneumatic pressure:0.6Mpa                    Motor power:3kw
      Hydrostatic test pressure:3.2Mpa             Weight:1.1T


      14. Cylinder drying machine
      The equipment is used for drying the bottle cylinder after water pressure test.




      15. Shot Blasting Machine
      Shot Blasting Machine for LPG Cylinder are predominantly used to clean LPG/CNC/GAS cylinder in a continuous through feed process, remove remains of casting sand and cores, rust, old paint, visible signs of welding, eliminate surface stress, improve the fatigue strength of the workpiece, increases workpiece film adhesion of the paint job, and ultimately achieve the aim of improving the quality of surface and internal, prepare for surface protection (coloring, enameling, galvanizing, etc.).
      Technical data
      Produing efficiency:80-120pcs/hr        Shot blasting machine:2 sets
      Hoist motor power:2.2KW                    Total power:31.2KW 
      Weight:16T                                           Workpiece size:?320mm*680mm
      Machine dimension:(L*W):7885*2460mm


      16.Spraying production line
      The spraying producing line for U track,using electric or natural gas,fuel oil,coal heating,hot air circulation,the allocation of fixed automatic spray gun 4,manual gun 1.Spraying powder or paint on the steel cylinders apperance.The cylinder into the oven drying after spraying
      Technical data
      Working voltage:380V 50HZ      Air pressure:0.4-0.6Mpa
       Total power:15KW             Working efficiency:180Pcs/jr


      17.Valve mounting machine
      The equipment is suitable for the liquefied petroleum gas cylinder angle value installation and use,it absorbs the domestic and foreign advance technology,using electrical control,pneumatic clamping,torque adjustable device,when reaching a certain torque,and go to the specificed direction after the automatic shutdown.The machine operation and flexible,convenient and safe
      Technical data
      Motor power:2.2KW                           Motor speed:1400r/min
      Work spindle speed:15.5r/min            Working air pressure:0.5-0.6Mpa
      Consumption per hour:1.14m3           Clamping cylinder stroke:120mm
      Rotation speed ration:1:59                  Weight:0.9T



      18.Leakage Air Test Machine
      The device for cylinder do tightness test with,composed of a water tank,a lifting cylinder,a bottle feeding machine,electric control part and other parts,work a bottle feeding mechanism of automatic cylinder will send to be test station,a lifting cylinder will fall into the water.the operating personnel rotation observations of the cylinder is not leaking cylinder,after the test and the cylinder out of water,a loop end.This machine is reasonable in structure,simple operation and maintenance.
      Technical data
      Air pressure:0.6Mpa                    Testing air pressure:2.2Mpa 
      Holding pressure time:60s            Weight:1.8T


       
      19.Burst Test Unit
      Recorded automatically by computer. Easy operate and reliable.
       

      Our services, shipping methods, warranty, payment terms, etc....                         

      RFQ for cylinder production line for Hydrostatic Test Pump
      Q: Can your machine be customized ?

      A: Yes, we are a professional manufacturer specialized in automatic welding 

      equipment more than 25 years, we have a strong design & technical team, 

      we can design and manufacture as per your requirements. 

       

      Q: How to get an accurate quotation ?

      A: Please provide us the detail of the workpiece such as drawing ,daily out put

       

      Q: What's the shipping cost from China to your country ?

      A: We can send machine to your port by sea . Customers specify freight forwarders or negotiable shipping methods.

       

      Q: Payment terms, MOQ, warranty, FOB...

      A: Payment terms: 30% down payment against order by T/T, balance 70% before delivery.

      Minimum order quantity: 1 set

      Delivery time: about 45 days after receipt of formal order and 30% deposit.

      Warranty: 12 months following delivery. We offer online service 24 hours all day long, Skype, 

      Email etc. You can contact us any time, if urgently, please call us.

       

      Q: what's the package ?

      A: Fumigation-free plywood case with wrapping film. 

       

      Q: Do you offer teaching & training ?

      A: Training at supplier's plant.

       

      Q: what's policy for guarantee and broken parts ?

      A: Warranty period of equipment is one year, during this time the broken parts and spares 

      caused by quality can be offered free.

      yy

      Hydrostatic Test Pump for sale, Please contact us for inquiry of Hydrostatic Test Pump

      内裤女教师无修版动漫