<p id="g949k"></p>

  1. <table id="g949k"></table>

    <output id="g949k"></output>
    <acronym id="g949k"><strong id="g949k"><xmp id="g949k"></xmp></strong></acronym>
    <pre id="g949k"></pre>

      Dongguan Suncenter Fluid Control Equipment Co., Ltd

      Expert of high pressure pumps and systems.

      Focusing on high pressure fluid field for over 15 years.

      Home > News > Content
      Low Cut Model: Ws-Ah 80-1000 Bar Air Pneumatic Hydrostatic Pressure Test System
      - May 11, 2017 -

      Product Detail

      Basic Info
      • Model NO.:Ws-AH

      • Pressure Medium:Oil

      • Type:Desktop

      • Position of Pump Shaft:Horizontal

      • Certification:CE

      • Trademark:Usun

      • Transport Package:Foam Inside, Carton Box /Wooden Box Outside

      • Specification:CE/ ISO9001

      • Origin:Made in Dong Guan / China

      • HS Code:8412310090

      Product Description

      High quality model : WS-AH  8-200 Mpa Portable 
      air hydraulic pressure test equipment ,portable
      air driven hydrotest equipment ,high pressure hydraulic test system
      Air liquid Pump System include WS-AH Model is complete hydraulic unit ready for connection which are provided for generating operating pressures up to 32MPa.It is suitable for powering a variety of medium, such as oil, water or corrosive liquids.
      As the pressure will be generated by means of a pneumatically operated pump.The electric connection will not be necessary.
      To operate this system, the air driven liquid pump have to be equipped with the air control unit combined filter and water seperator, pressure-regulating valve, pressure control gauge as well as manual relieve valve. In this operation, the pump will be mounted to the stainless steel tank in the stainless steel frame in a compact and space saving manner. high Pressure gauges,  high pressure needle valves and air  pressure regulators will be fitted on panel.
      The desired operating pressure can be attained by adjusting the driving air pressure. When the driving air pressure and the output pressure reach the balance, the pump stops filling pressure and the output pressure stays at the preset value.
      This hydraulic unit can be used for all kinds of pressure testing and test tools for research and test institutes or for other functions requiring a determined pressure.  
      The configuration of the systems include :  air pressure gauge , outlet pressure gauge ( On the first line of the Panel )
      The hand ball ( For control the on/ff the system ) , air pressure regulator valve ( for control the air pressure  )
      Outlet needle valve ( for control the output of High pressure ) ,Uploading needle valve ( For releasing the high pressure ) ,it is on second line  and also include 1 set AH air driven liquid pump , 10 Liters hydraulic tank  inside of the cabinet  and related pipelines
      Technical parameters 



      Air drive pressure


      Max. outlet pressure
      (at air drive pressure of 8bar)


      Generation of pressure

      air drive liquid pump Model :AH

      Pressure ratio

      10:1 or 40:1 or 64:1 or 100:1 Or 300:1

      Air consumption

      0.6-1.2 m3/min

      Operating medium

      Oil, water, non-corrosive liquids

      Driving medium

      Compressed air

      Oil /Water tank capacity


      Dimensions (W x D x H)


       AH model ,Maximum filling flow rate is around :8-10 Liter per Min ,when pressure increase ,the flow rate comes down
      Specification of the AH Pump as bellow for reference ,this is also for Liquid system