<p id="g949k"></p>

  1. <table id="g949k"></table>

    <output id="g949k"></output>
    <acronym id="g949k"><strong id="g949k"><xmp id="g949k"></xmp></strong></acronym>
    <pre id="g949k"></pre>

      Dongguan Suncenter Fluid Control Equipment Co., Ltd

      Expert of high pressure pumps and systems.

      Focusing on high pressure fluid field for over 15 years.

      Home > News > Content
      Test Bench for Automobile Braking Valves
      - May 19, 2017 -

      Basic Info

      • Model NO.: QYZ-2

      • Certification: ISO

      • Condition: New

      • Power: 380V 50Hz

      • Trademark: Haolida

      • Origin: Qingdao China

      • Testing Equipment Type: Car Fault Detector

      • Update Method: by Hard Disk

      • Standard: Standard

      • Motor Power: 5.5kw

      • Specification: ISO9001

      • HS Code: 9301200090

      Product Description

                                   QYZ-2 Model Automobile Braking System Test Bench
      1.Technical Parameter
      Working power: AC380V 50HZ (Made to measure)
      Motor power: 5.5KW
      Variable frequency speed regulating range:
      no load 0-5000r/min
      load 0-2000r/min(continuously adjustable)
      Volume of main air tank: 20L*2 or 20L*3
      Volume of sub air tank: 2L*3
      Auxiliary tank of air pump: 15L
      Requirement of external air source: 0.85Mpa
      Microcomputer hour meter: 000.000--999.999S(adjustable)
      Rated pressure of oil pump: 0.3MPa
      2. Function Introduction (double-chamber or three-chamber test)
      This air braking test bench is used mainly for testing performance of air compressor, master valve, air chamber, quick release valve and four-circuit valve in brake system of high, medium and low models automobiles at home and abroad and carrying out double-chamber or three-chamber test of master valve.
      Test Items:
      air compressor: The time required by air compressor to reach specified pressure value when air compressor runs at rated RPM.
      Master valve: the required time of inflating air from main tank into air chamber through master valve (the time through air);
      Air chamber: after air is inflated from main tank into air chamber to reach set pressure value, hold the pressure.
      Quick release valve: after air is inflated from main tank into sub-tank through quick release valve to reach set pressure value, hold the pressure.
      Four-circuit valve: the same with test of quick release valve.

      MOQ: 1 set
      Panel: English
      Delivery time : 35days
      Payment term:
      T/T 50% in advance,50% before delivery
      Packing :
      Export Plywood case
      1700*950*1680=2.71CBM1040*745*1330=1.03CBM
      Total:3.74CBM
      G.W: 520KGS
      N.G: 400KGS



      内裤女教师无修版动漫